STELA Laxhuber will commission their so far longest low-temperature belt dryer type 1/6200-61,5 at the company Arauco in Chile.
>>
>>
Södra Cell, one of the largest producers in paper manufacture based in Sweden, acquired the STELA low-temperature belt drier 1/6200-49.5. >>
In Süddeutschland ist die Stela-Laxhuber Trocknungstechnik GmbH ansässig (Landkreis Rottal-Inn). Sie bietet auch ein Verfahren zur Trocknung von Gärprodukten mit >>
Indirect air heaters
STELA indirect air heaters are applied in processes where mixing of the flue gas with the air to be heated up is unrequested, e. g. when drying breadstuff with fuel oil.
STELA indirect air heaters are certified by the German Technical Control Board and have a certified efficiency of 90 % with outlet temperatures up to 120 °C.
indirect operation direct operation
Hot air generation with indirect air heater
The indirect air heater consists of an outer casing, an intermediate casing against radiation
losses, gas passes and a closed combustion chamber made of highly heat-resistant steel,
which is arranged centrically in the casing. Here the heating energy is transmitted to the
fresh air only via the heat exchanger surfaces of the closed combustion chamber and the
gas passes. The cooled combustion gases are drawn off into the open air via a chimney.
Thus the hot air is completely free of flue gases.
STELA Laxhuber GmbH | Öttingerstr. 2 | D-84323 Massing | T +(49) 8724/899-0 | F +(49) 8724/899-80
Copyright © 2012 by stela Laxhuber GmbH | All rights reserved | Website by www.wb-24.de